Approved Products List – Bridges & Structures

Patching Materials

Pre-Bagged Concrete Patching Materials

Our preferred material for deck patching is ready-mix concrete (pre-approved mix design). This list shall only be used in situations where ready-mix concrete is not available or economical.

HEH LTH NH OH-V Product Manufacturers Notes
X

      MasterEmaco T415
(formerly EMACO T415)

BASF / MBT Protection & Repair

 
X

      MasterEmaco T430
(formerly EMACO T430)

BASF / MBT Protection & Repair

1

X

      MasterEmaco T 1060
(formerly 10-60 Rapid Mortar)

BASF / MBT Protection & Repair

 
X

      Traffic Patch Coarse

Target Products Ltd.

1

X

      Traffic Patch Fine

Target Products Ltd.

1

X

      Planitop 18 ES

MAPEI

X

      HD-50

Dayton Superior

 

  X     MasterEmaco T 545
(formerly Set 45)

BASF / MBT Protection & Repair

1, 2
(-20C, dry substrate)

 

  X

  MasterEmaco T 1061
(formerly 10-61 Rapid Mortar)

BASF / MBT Protection & Repair

    X

  Flowcrete

Target Products Ltd.

 
    X

  Mapecem 202

MAPEI

 
    X

  Sika Top 111 Plus

Sika Canada Inc.

 
    X

  Sika Top 122 Plus

Sika Canada Inc.

 
    X

  Express Repair

Euclid Canada

 
    X

  EucoRepair SCC Fast

Euclid Canada

 
    X

  VersaSpeed 100

Euclid Canada

 
      X

MasterEmaco S 466 CI
(formerly EMACO S 66 C1)

BASF / MBT Protection & Repair

 
      X

MasterEmaco S488 CI
(formerly EMACO S 88 C1)

BASF / MBT Protection & Repair

 
      X

Sika Top 123 Plus

Sika Canada Inc.

 
      X

MasterEmaco S 440MC
(formerly LA Repair Mortar)

BASF / MBT Protection & Repair

 
      X

MasterEmaco S 440
(formerly LA 40 Repair Mortar)

BASF / MBT Protection & Repair

 
      X

Planitop 15

MAPEI

 
      X

Planitop 23

MAPEI

 
      X

Planitop X

MAPEI

 
      X

EucoRepair V100 Euclid Canada  
      X

Meadow-Patch 20

W.R. Meadows Inc.

3


Notes:

  1. Do not use (NOT COMPATIBLE) with Galvashield XP anodes or MasterProtect 8065CP/8105CP.
  2. Never wet cure or apply curing compound.
  3. Use for rehabilitation of precast concrete.

We acknowledge potential equivalent products to the list above and will evaluate them on a case by case basis.

ASTM C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

Patch Types

Type HEH

High early horizontal (HEH) patches are used to repair flat areas such as bridge deck potholes or curb top spalls. These products are generally used during the summer when good weather conditions prevail, i.e. at temperatures above 10oC, and a high early strength is required in order that traffic may be allowed to resume quickly. They are designed to be poured into place.

Type LTH

Low temperature horizontal (LTH) patches are used to repair areas similar to those described in NH when the ambient temperature is in the range of 0o to 5oC and generally during the spring and late fall. Do not use Type LTH in hot summer conditions. They are designed to be poured into place.

Type NH

Normal horizontal (NH) patches are used to repair areas such as bridge deck potholes or curb top spalls. These products are generally used during the summer when good weather conditions prevail. Traffic or overlay may be placed after three days of curing. They are designed to be poured into place.

Type OH-V

Overhead or vertical patches (OH-V) are used to repair areas such as high load damage to precast girders, spalling on the underside of bridge decks, vertical faces of curbs, pier caps, abutment seats and backwalls. These products are generally used during the summer when good weather conditions prevail. They are generally designed to be applied by trowelling rather than forming.